Only the families we see on Barcelona doors and for which we have a replacement or an adaptation. Each group links to the service usually requested.
The homepage keeps TESA, CISA, Yale and Mottura: they are the ones most often requested. ISEO and AZBE are added here; they appear in older buildings and on some security cases.
We do not publish a catalogue of twenty names. If your cylinder is not on this list, send a photo of the faceplate: we say whether an equivalent can be measured and fitted.
T60 · T80 · TK100 · standard euro-profile cylinders
They fit most flat mortise locks and many 1990s and 2000s reinforced doors. Inside and outside length must be measured: a short T60 leaves the barrel exposed.
A common cylinder change. On a TK100 the cam and retaining screw are respected; the case is not forced if the pocket is original.
ASIX · RS3 · euro-profile cylinders and some mortise cases
Often seen on Eixample and Sant Martí portals and flats. Replacement needs the same cam and diameter; an ASIX is not swapped for a generic euro-profile without checking the case.
Cylinder change and, if the case is marked, lock repair or lock replacement.
Standard euro-profile · Y217 / 30-30 to 45-45 equivalents
Inexpensive site and rental-flat cylinders. They fit standard cases. They are not presented as a security cylinder: if you want more control, we change to a TESA or CISA security barrel.
Barrel replacement when a key is lost or the turn is stiff. The lock case is left alone if it still throws.
Multi-point security cases · related plates and bolts
Reinforced doors and some shop leaves that already have a Mottura pocket. A Mottura case is not fitted on a 35 mm thin leaf: there is no edge to anchor.
Replacement or installation of a security lock and the cylinder that case needs. Link to the security page.
R6 · F6 · euro-profile cylinders
They appear in Les Corts and Nou Barris blocks. Replacement by length and cam. An F6 can be swapped for another euro-profile of the same size if the case is standard.
Cylinder change. If the ISEO case will not throw, repair is checked before replacing the whole lock.
Older mortise locks · 1970s and 1980s tenement cases
Very common in Gràcia, Ciutat Vella and Sants. The pocket is often narrower than a current case. Sometimes it is repaired; sometimes the pocket must be adapted.
Repair of the throw or lock replacement when the case is cracked. A modern cylinder is not promised without seeing the faceplate.
Car locks, motorbikes and safes: we do not handle them.
Electronic cylinders, card readers and portal automation: if the fault is electrical, it is not this trade.
Brands with no replacement on the visit: that is said at the threshold and a measured equivalent is proposed, not a catalogue name.
Copies of a security cylinder are controlled by the set itself. If you have lost the set, the cylinder is changed; a copy is not invented without a card or a master key.
No. You need an edge, a frame and a pocket that can be anchored. If the leaf is thin, that is said and another route is proposed.